To pause Roomba during a cleaning cycle, press CLEAN. » To resume the cleaning cycle, press CLEAN again. » To send Roomba back to the Home Base, press (Dock) • To end the cleaning cycle and put Roomba in standby mode, press and hold CLEAN until Roomba’s indicators turn off.
How do I get my Roomba back to the dock?
How to Send Roomba Home to Dock
- Verify that the home base is plugged in. If it’s not, your Roomba will be unable to locate it to dock. …
- Pick the Roomba up and set it down within five feet of the home base.
- Press the “Spot” and “Clean” buttons simultaneously. The Roomba will now drive into the home base to dock.
Why is my Roomba not returning to home base?
If your Roomba is having trouble finding its way home or other rooms, there might be something preventing a clear path to the dock or said room. Another common reason why this happens is that someone moved the Roomba as it was cleaning, which throws off where it thinks the dock or room is.
How do I make Roomba go to another room?
If you want to add areas to your Smart Map, run a Select All clean from the New Job button or a Mapping Run to allow your robot to access all the areas of the floor. After the job, your Clean Map will highlight “New Space Found.” Your Smart Map should also automatically update with the new space.
How does Roomba know to dock?
When the battery power is running low, the robot uses its infrared sensors to locate the charging dock, which also emits infrared beams. The Roomba then follows the beams’ path toward the dock where it can recharge before resuming the cleaning session.
How do I send my Roomba home?
Tell your Roomba to go home through the iRobot HOME app.
Open up the iRobot HOME app on your smartphone. Tap on the “Clean” button within the app—this will bring up the “Send Home” option. Tap this option on your phone to automatically send your Roomba back to its Home Base.
Why wont my Roomba leave the dock?
Re: Roomba won’t leave the dock
There may be mechanical interference preventing the Roomba from leaving the base. Check the charging contacts on both the underside of the Roomba and the top of the homebase.
Where is the best place to put my Roomba dock?
- At least >1.5 ft (0.5 m>) on each side of the Home Base®.
- At least >4 ft (1.2 m>) in front of the Home Base®, with no furniture such as tables or chairs within this area.
- At least >4 ft (1.2 m>) between the Home Base® and any stairs.
- At least >8 ft (2.4 m>) from Virtual Wall® barriers.
Can I pick up Roomba and move it?
You can pick up and move a Roomba. However, you should make sure you keep the Roomba’s Home Base in the same space as you’re moving the Roomba. It’ll also be helpful for you to wait until the Roomba reaches its cleaning cycle’s end.
What happens if I move my Roomba base?
What Happens If You Move Roomba Home Base? … When you move your Roomba home base to a new location but still within the same room that your Roomba has mapped out already, it will dock with no issues when next it does a cleaning run from that place.
Will Roomba go from room to room?
Answer: Roomba will clean your whole house, or as much as it can do on one charge. … As long as there are no stairs in between, Roomba moves itself from room to room.
Does Roomba go back to base when full?
Just in case you’re new to using the Roomba, the device is designed to return to the home base to recharge and dock once it runs out of battery or it has completed the cleaning cycle. You can also manually send your Roomba to dock itself before the cleaning cycle is over or the battery is drained if you want.
How long does it take for Roomba to dock?
Check the area around the charging base. Depending on the size of the room you Roomba should run for sometime between about 40 minutes and an hour.
Can a Roomba go over area rugs?
Yes! Roomba picks up an amazing amount of dirt, dust, pet hair and other debris from your carpets and hard floors. Roomba automatically transitions from one floor surface to the next, including carpets, rugs, tile, linoleum and hardwood floors.