Why does my Roomba not return to base?
If your Roomba won’t return home after a cleaning session or after you manually tell it to through the app or on the device itself, this is often due to it having trouble navigating back to the dock. Ensure that the Roomba has a clear path to the charging station with no wires or anything else in the way.
Why does my iRobot not dock?
There are other causes of the Roomba dying before docking; the reason could be any of: Debris under the unit obstructing the sensors. No continuity or bad Roomba sensors. Docking station pins not operating correctly.
How do I reconnect my Roomba?
On the Roomba itself, tap and hold the buttons with the target icon and the home icon until the Roomba makes a tone. Your vacuum will take a moment to connect to your Wi-Fi network. Once it’s done, you should see a screen like the one on the right.
How do I get my Roomba 690 back to dock?
Avoid any of exotic objects on the bumper as well as docking station. Use a dry cloth to remove debris from your iRobot Roomba filter; plus, also clean the charging contacts on the home base. Place this robotic vacuum cleaner within 6 ft. of the home base and then hit Dock button for it to come back.
How does Roomba find the dock?
It accomplishes this using the infrared receiver on its front bumper. When the battery power gets low, the vacuum starts looking for the infrared signal emitted by the charger. Once it finds it, Roomba follows the signal and docks itself to the charger.
How do I send my Roomba back to base?
To pause Roomba during a cleaning cycle, press CLEAN. » To resume the cleaning cycle, press CLEAN again. » To send Roomba back to the Home Base, press (Dock) • To end the cleaning cycle and put Roomba in standby mode, press and hold CLEAN until Roomba’s indicators turn off.
Why does Roomba take so long to dock?
Make sure that the docking station IR windows are clean and not full of dust, finger prints smudges. Try to move the doc station into another area of the house and try to doc it again. Make sure it’s within 5 feet without any objects that could interrupt it’s straight path to the doc station.
What happens if I move my Roomba base?
What Happens If You Move Roomba Home Base? … When you move your Roomba home base to a new location but still within the same room that your Roomba has mapped out already, it will dock with no issues when next it does a cleaning run from that place.
Why is my Roomba not connecting to cloud?
A robot not seated properly will quickly drain its battery and lose its connection to the cloud. Confirm your Wi-Fi passwords have not recently changed. If they have, you’ll need to update your Wi-Fi information though the app in Robot Settings. … Next, disable Wi-Fi on your phone and make sure cellular data is enabled.
Why can’t my Roomba connect to cloud?
If your Roomba won’t connect to Wi-Fi/Cloud, it’s possible that the Wi-Fi signal is not reaching your Roomba. Older and cheaper routers may not send a signal far enough to adequately cover the entire house. However, if you have good Wi-Fi, you can try rebooting the Roomba and the router.