When your Roomba won’t charge, there are two common situations – making sure either the Home Base has power or no dust on the charging contacts. Sometimes using the wrong kind of battery as well as having issues with the power source can also make your robot not turn on or charge.
What do you do if your Roomba won’t charge?
If your Roomba is not charging, clean the charging ports with a soft cloth and some rubbing alcohol to remove dust, hair, or gunk accumulation. You may also have to reinstall or replace your battery or charging dock or even reset the Roomba to factory settings.
How do I reset my Roomba battery?
How to reset the Roomba battery?
- Press the CLEAN button to turn on the Roomba.
- Hit the SPOT and DOCK buttons simultaneously for 10 seconds.
- Release both buttons at the same time as soon as you hear the typical beep sound.
- Stop loading the robot for at least 12 hours and then try it.
How do I know if my Roomba battery is bad?
The power light on a fully charged Roomba will come on in a green solid color. On the other hand, when the battery is charging you will notice a pulsing amber color. Additionally, the light will be flashing red when the battery is too low and solid red when completely drained.
How do I know if my Roomba is charging?
Charge Roomba using the Home Base. Indicator lights will turn off after 60 seconds to conserve energy while Roomba is charging. Check status of the battery by pressing the CLEAN button to illuminate the Battery Indicator. Indicator will appear amber while the battery is charging and solid green when fully charged.
How do I test my Roomba battery?
Try running the Roomba until it just stops on its own, then charge your Roomba directly without the homebase for 3 days uninterrupted. Then try another run. If there is a runtime improvement you can repeat the whole process twice more, at the end of the third charging attempt the battery will be at its peak output.
Wi-Fi Connected 600 & 800 Series Robots: Press and Hold the Dock and Spot Clean and CLEAN button down until the robot makes a beep tone, then release. Roomba Combo: Open the lid and locate the recessed Reset button to the left of the On/Off switch. Press and hold the Reset button for ten seconds.
How long do Irobot roombas last?
You’ve probably seen Roomba commercials on TV or the internet, and you’ve also likely seen how expensive some models are. But do they last long? A Roomba vacuum clean can last you between 2 to 6 years.
What does blue light on Roomba mean?
c) A solid blue magnifying glass means that Roomba is in intensive clean mode. … The machine does not stop cleaning when the bin is full, so you may want to clean again if you find it with a full bin, as it is obviously not very efficient in this condition.
Does Roomba light stay on when charging?
Does the Roomba light stay on when charging? Different models of Roomba vacuums display different lights while charging. The 900, 800, and 700 series Roombas display light for the first 60 seconds of the charging cycle.
What does red light mean on Roomba?
Your Roomba uses its red light ring, in combination with sounds and app notifications, to communicate different statuses. … When the red light ring around the CLEAN button is sweeping toward the rear, it is about time to empty the bin. Find out more about cleaning the Roomba i Series bin here.