Make sure that your mobile phone and the Roomba are connected to the same wireless network. Use another device to test the internet connection and confirm that it is working. Ensure that the Roomba and the Home Base docking station are situated close to the wireless router for maximum signal reach.
Why wont my Roomba connect to the app?
If your robot cannot be found in the network, reboot the robot and router, force close the iRobot HOME App, and retry the Wi-Fi setup process. If the problem persists, check your Wi-Fi settings on your router to confirm they are compatible with the Wi-Fi setup process.
How do I reset my Roomba app?
Factory reset through the iRobot® HOME App (recommended)
- Open the iRobot® HOME App and ensure your mobile device is connected to the same Wi-Fi network as your Wi-Fi connected Roomba®.
- Press Settings ➔ Remove/Factory Reset (robot name).
How do I reconnect my Roomba app?
Connecting Roomba® to the iRobot® HOME App
- Step 1 – Complete Setup Checklist. Confirm you are ready to start: …
- Step 2 – Verify Bluetooth is Turned ON. …
- Step 3 – Home Base® Charging Station Placement. …
- Step 4 – Name Your Robot. …
- Step 5 – Connect Roomba® to Your Wi-Fi. …
- Step 6 – Activate Roomba®
Why does my Roomba not connect to cloud?
If you are receiving a message that Roomba® does not have a cloud connection, please try the following steps to reconnect: Confirm your robot is on its charging station or evac dock and that it is properly charging. A robot not seated properly will quickly drain its battery and lose its connection to the cloud.
How do I connect my Roomba to my Iphone?
How to set up a Wi-Fi Connected Roomba?
- Step 1: Download the iRobot® HOME App. The iRobot® HOME App allows you to use your iOS or Android smart device to help you have the best possible experience with Roomba®. …
- Step 2: Activate Roomba® Wi-Fi Signal. …
- Step 3: Start Cleaning Cycle.
How do I reprogram my Roomba?
Press and hold the Home, Spot Clean, and Clean buttons simultaneously. Then, wait for the light ring around the Clean button to begin swirling. Once there’s a light ring, let go of the three buttons. Now, the Roomba will restart, signaling the end of the factory reset process.
Why is my Roomba flashing orange?
The flashing orange light means it senses that the battery has been discharged and when docked it is recharging. Do not interrupt the cycle of charging the orange blinking light will cease and the unit should operate normally once charging is complete.
How do I uninstall Roomba app?
Conversation. Great question, to remove a robot from the app simply navigate in the app to Settings ➔ Remove “Robot Name”. We can also help keep your robot working.
How do I use Roomba home without app?
Press the dock button on your Roomba.
Look for the “Home” button along the top of your device—this is a small, circular button to the left of the larger “Clean” button. Press this button once to send your Roomba back to its Home Base.
Can Roomba work without Wi-Fi?
Can I Use a Roomba Without WiFi? Yes, it will still clean your home. “The Roomba is very simple,” says Frank Rizzi, a Consumer Reports senior test technician. “Hit the start button and it’ll clean your room.
What does blue light on Roomba mean?
c) A solid blue magnifying glass means that Roomba is in intensive clean mode. … The machine does not stop cleaning when the bin is full, so you may want to clean again if you find it with a full bin, as it is obviously not very efficient in this condition.
What does red light mean on Roomba?
Your Roomba uses its red light ring, in combination with sounds and app notifications, to communicate different statuses. … When the red light ring around the CLEAN button is sweeping toward the rear, it is about time to empty the bin. Find out more about cleaning the Roomba i Series bin here.