The MAX mode provides 3X more suction power. When you start the robot in a room and close the door, it will continue to clean until you stop it or the battery runs down.
Why does my shark robot says Max?
If the Clean RED or Max light is flashing, it means that the robot may be stuck on an obstacle or the front bumper may be jammed. To fix this error, relocate the robot to a different location and inspect the bumper.
Does the shark ion robot tell you when its full?
2 Using the app, press the DOCK button to automatically send Shark ION ROBOT to the charging dock. While the battery is charging, all three blue LED lights will cycle until fully charged. As the unit cleans, its battery discharges. The blue lights indicate how much charge is remaining.
Why does my shark ion robot keep stopping and beeping?
A Shark robot vacuum will keep stopping because of one of two things: the Shark robot vacuum is stuck and cannot move, or something is stuck inside the main brush roller. Once you clean the cylinder brush thoroughly, a Shark robot vacuum should work normally.
Should I leave my shark robot on all the time?
We would like you to know that you can leave the Shark ION™ Robot Dual-Action Robot Vacuum on the charging dock, even after it is fully charged. This will make sure that the vacuum has a full charge when you start a cleaning cycle. … This will make sure that the vacuum has a full charge when you start a cleaning cycle.
How do you reset shark?
Open the official Shark ION app, then go to the Settings section. Find the ‘Factory Reset’ option, select and confirm it. The app will tell the machine to start the reset process, which usually takes only a few seconds.
How do I reset my shark vacuum?
To reset the shark vacuum, put the Power button on the On-Off position and keep the vacuum unplugged. If necessary, clear the hose. Plug the vacuum in again after it cools completely.
What does green light on shark mean?
When the light is illuminated green, the brush roll is functioning properly. Red indicates that the brush roll is blocked. Alternatively, when cleaning the vacuum, if there is no brush roll obstruction the red light may indicate that the vacuum is overheated.
Does Shark IQ work in the dark?
Because optical light sensors require light to navigate, it’s best to not run it at night in a dark and sleeping house (because you might get startled from the loud thunks as it bumps into your garbage can). The vacuum has two rotating side brushes, a carpet brush, and a bumper.
What does the blue light on my shark mean?
The dock indicator light will flash blue and the robot will beep when charging begins. When the cleaning cycle is complete, or if the battery is running low, the robot will search for the dock. If your robot doesn’t return to the dock, its charge may have run out.
NOTE: If the low charge light is blinking red, there is not enough charge for the robot to return to the dock. Manually place the robot on the dock, leaving a half-inch space between the front of the robot and the face of the dock.
Why are my lights flashing on my shark?
If a light is flashing, it usually means that something is preventing your vacuum from running. If your Shark vacuum light is flashing, that means the brush roll isn’t spinning. Red lights can mean that the brush roll is jammed or the vacuum is overheating. … Flashing lights indicate that something needs to be fixed.
How long does a shark ion robot battery last?
The ION Power Core battery, like all lithium-ion products, will naturally decrease in capacity over time from the 100% capacity of a new battery. The battery life expectancy is at least two years and comes with a two-year limited warranty.
Should I unplug the dock charger when the robot cleaner is fully charged?
Should I unplug the dock charger when the robot cleaner is fully-charged? Usually, we suggest customers put device on dock all the time if it is used every week. … Of course, we still suggest customers turn off device if it will not be used for several months.
How long does it take to charge the shark Vacmop?
A full charge takes approximately 3.5 hours. The Shark VACMOP is designed to handle anything from quick pickups to whole cleaning sessions—just charge it between uses.