How do I update my Neato software?
Open the App or Play Store on your Smartphone and update the App to the latest version. As soon as the Software-Update has successfully been installed, the Neato Botvac Connected robot vacuum plays the Start-Bell-Ring. The new version can now be checked in the menu at About > Version Info.
Why wont my Neato connect to WIFI?
If your first attempt at pairing was unsuccessful, you’ll need to place the robot back into pairing mode. 1. Press and hold the “Right Bumper” and “Start Button” simultaneously for 10 seconds. … Allow the robot to turn off, then press the “Start Button” to turn it back on.
* NOTE: if LED light is Blinking Red or Solid Red, your robot needs robot maintenance or your robot has a navigation issue. Please check the troubleshooting section of this guide. In normal operation, the Neato robot comes offof its base, explores its surroundings, and starts cleaning.
How do I reset my Neato WIFI?
To do a Reset of the Neato robot, press and hold the Start button for 15 seconds, and all the lights will turn off. Press Start button once more to turn the robot back on.
Why is my Neato Vacuum not working?
Clean the charge bars on the Charge Base and Robot with a dry cloth and make sure they are clear. Make sure the cable that is connected to the back of the charge base is completely pushed in. Try another power outlet or connect your charge base directly to the wall and not the power strip to see if the Neato charges.