Error eleven (11) means the vacuum in the bin is not functioning properly. You may need a replacement AeroForce™ bin. Please visit the iRobot Store, use an authorized retailer, or contact iRobot Customer Care to place your order..
How do I reset my Roomba battery?
How to reset the Roomba battery?
- Press the CLEAN button to turn on the Roomba.
- Hit the SPOT and DOCK buttons simultaneously for 10 seconds.
- Release both buttons at the same time as soon as you hear the typical beep sound.
- Stop loading the robot for at least 12 hours and then try it.
How do I force my Roomba to reboot?
Press and hold HOME and SPOT Clean buttons on your robot for 10 seconds. When the button is released, Roomba will play the reboot tone. Wi-Fi connected Roomba 800 series. The reboot procedure is the same for Roomba 500 & 600 series, and also Wi-Fi connected Roomba 600 & 800 series.
Wi-Fi Connected 600 & 800 Series Robots: Press and Hold the Dock and Spot Clean and CLEAN button down until the robot makes a beep tone, then release. Roomba Combo: Open the lid and locate the recessed Reset button to the left of the On/Off switch. Press and hold the Reset button for ten seconds.
How do I reprogram my Roomba?
Press and hold the Home, Spot Clean, and Clean buttons simultaneously. Then, wait for the light ring around the Clean button to begin swirling. Once there’s a light ring, let go of the three buttons. Now, the Roomba will restart, signaling the end of the factory reset process.
How do I know if my Roomba battery is bad?
The power light on a fully charged Roomba will come on in a green solid color. On the other hand, when the battery is charging you will notice a pulsing amber color. Additionally, the light will be flashing red when the battery is too low and solid red when completely drained.
How do you fix a Roomba that won’t charge?
If your Roomba is not charging, clean the charging ports with a soft cloth and some rubbing alcohol to remove dust, hair, or gunk accumulation. You may also have to reinstall or replace your battery or charging dock or even reset the Roomba to factory settings.
Why is my Roomba flashing orange?
The flashing orange light means it senses that the battery has been discharged and when docked it is recharging. Do not interrupt the cycle of charging the orange blinking light will cease and the unit should operate normally once charging is complete.
Can’t connect to Roomba?
If your robot cannot be found in the network, reboot the robot and router, force close the iRobot HOME App, and retry the Wi-Fi setup process. If the problem persists, check your Wi-Fi settings on your router to confirm they are compatible with the Wi-Fi setup process.
What does blue light on Roomba mean?
c) A solid blue magnifying glass means that Roomba is in intensive clean mode. … The machine does not stop cleaning when the bin is full, so you may want to clean again if you find it with a full bin, as it is obviously not very efficient in this condition.
How do I reset my i robot?
Roomba i Series Reset:
- Press and Hold the HOME, SPOT CLEAN, and CLEAN buttons at the same time.
- Wait for the white light ring around the CLEAN button swirls.
- Release the 3 buttons.
- The Roomba will restart to finish the factory reset.
Why is my Roomba flashing red?
Flashing red indicates a problem with battery charging. Either the charger is bad, or the charging circuit in your Roomba is bad.